|
Juniper JN0-341 Exam - OKExams.com Free JN0-341 Sample Questions:
Q: 1
Which command copies the factory-default files to your backup media?
A. request system snapshot rescue
B. request system snapshot factory
C. request system snapshot default
D. request system snapshot as-primary
Answer: B
Q: 2
What are two methods of accessing a Juniper enterprise router? (Choose two)
A. RSH
B. HTTPS
C. console
D. J-Config
Answer: B, C
Q: 3
What is the default route preference for static routes?
A. 0
B. 5
C. 10
D. 170
Answer: B
Q: 4
What is shown by the command show interfaces extensive fe-0/0/0 but not shown by the command show interface detail fe-0/0/0?
A. input error counter
B. interface MTU size
C. input packets counter
D. the IP address on logical interface fe-0/0/0.0
Answer: A
Q: 5
What does the number one (1) represent for interface fe-0/0/1?
A. port number
B. PCI slot number
C. channel number
D. virtual PlC number
Answer: A
Q: 6
What are two functions of the Intel IXP processors? (Choose two.)
A. keepalives
B. route-lookup
C. CRC validation
D. Layer 2 decapsulation
Answer: A, C
Q: 7
Which CLI command will ping destination 10.0.29.1 ten times and display the incoming interface
of the received packet?
A. ping count 10 10.0.29.1 detail
B. ping number 10 10.0.29.1 detail
C. ping count 10 10.0.29.1 extensive
D. ping number 10 10.0.29.1 extensive
Answer: A
Q: 8
Which J-Web menu displays the users currently logged into the CLI?
A. Monitor> Users
B. Manage> Users
C. Monitor> System
D. Manage>System
Answer: C
Q: 9
Which multicast address does RIPv2 use for route updates by default?
A. 224.0.0.2
B. 224.0.0.5
C. 224.0.0.9
D. 255.255.255.255
Answer: C
Q: 10
Which two statements regarding system logging on a Juniper enterprise router are correct? (Choose two.)
A. The system log has a proprietary format.
B. System logs must be sent to a remote device
C. New system logs can be created and archived.
D. Most software processes create their own logs.
Answer: C, D
Q: 11
In configuration mode you see the following prompt:
[edit interfaces fe-1/1/1]
user@route r#
Which command will take you to operational mode?
A. end
B. exit
C. quit
D. exit configuration-mode
Answer: D
Q: 12
Which three options can be used with the load CLI command? (Choose three.)
A. merge
B. replace
C. partial
D. complete
E. override
Answer: A, B, E
Q: 13
The protect-re filter is applied as an input filter on the lo0.0 interface and all possible services are enabled under [edit system services].
[edit]
Instructor@R2# show firewall
family inet {
filter protect-re {
term 1 {
from {
protocol tcp;
destination tcp;
destination-port ssh;
}
then accept;
}
term 2 {
from {
protocol tcp;
destination-port http;
}
then accrpt;
}
}
}
Which two methods can you use to access the router? (Choose two.)
A. FTP
B. SSH
C. Telnet
D. J-Web
Answer: B, D
Q: 14
Which type of IGP should you use to achieve scalability in a large enterprise network?
A. link-state protocol
B. path-vector protocol
C. Bellman-Ford protocol
D. distance-vector protocol
Answer: A
Q: 15
The J-Web application can install the JUNOS software from which two locations? (Choose two.)
A. SDX
B. local PC
C. BSD shell
D. remote host
Answer: B, D
Q: 16
How many committed configuration files are stored on the Juniper Networks enterprise router?
A. 4
B. 15
C. 48
D. 50
Answer: D
Q: 17
Which CLI command displays all OSPF LSAs received by the local router?
A. show ospf neighbor
B. show ospf database
C. show ospf interface
D. show ospf adjacency
Answer: B
Q: 18
Which two field-replaceable units (FRUs) are hot-swappable?
A. Routing Engine on M10i
B. Physical Interface Card on M7i
C. Fan tray on J-series routers
D. Physical Interface Modules on J6300 router
Answer: A, B
Q: 19
Which three initial configuration methods are supported on J-series routers? (Choose three.)
A. CLI
B. J-Web
C. JUNOScope
D. autoinstallation
E. PCMCIA flash card
Answer: A, B, D
Q: 20
What is one configuration method for loading a factory default configuration onto a J-series router?
A. load override reset
B. load factory-default
C. rollback factory-default
D. request system factory-default
Answer: B
Q: 21
Which two components of the JUNOS software architecture are found on all Juniper enterprise routers? (Choose two.)
A. multiple software daemons
B. separation of control and forwarding
C. separate management interface (fxp0)
D. Application Specific Integrated Circuits (ASICs)
Answer: A, B
Q: 22
In the exhibit
Which OSPF configuration is generated as a result of the J-Web configuration?
A. protocols {
ospf {
area 1.0.0.0
{
interface fe-0/0/1.0;
interface all;
}
}
}
B. protocols {
ospf {
area 1.0.0.0
{ interface fe-0/0/1.0 disable;
}
interface all;
}
}
}
C. protocols {
ospf {
area 1.0.0.0
{ interface fe-0/0/0.0;
interface fe-2/0/0.0;
interface fe-0/0/1.0
{ passive;
}
}
}
D. protocols {
ospf {
area 1.0.0.0
interface fe-0/0/0.0;
interface fe-2/0/0.0;
interface all;
}
}
}
Answer: B
Q: 23
In the exhibit
You are connecting a Juniper router to a remote site and are running RIP between sites.
What is required on the CD router to allow RIP routes from Site 1 to be sent to Site 2?
A. An import policy on Site 2 to accept RIP routes from the CD.
B. An export policy on the CD router to send RIP routes to Site 2.
C. An import policy on the CD router to receive RIP routes from Site 1.
D. Include Site 1 and Site 2 in the same RIP group and allow default policy to forward the routes between group members.
Answer: B
Q: 24
Which CLI command can be used to determine if autoinstallation is active?
A. show autoinstallation detail
B. show system autoinstallation status
C. show autoinstallation activity detail
D. show system initial-configuration status
Answer: B
Q: 25
What is the role of route preference?
A. It is used to select which routing table to use for forwarding.
B. It is used to determine what routes to accept into the routing table.
C. It is used to select the best route between multiple equal cost paths.
D. It is used to determine which route should become active.
Answer: D
Q: 26
Which type of OSPF router has interfaces in more than one area?
A. area line router
B. designated router
C. area border router
D. multiple area router
Answer: C
Q: 27
Which OSPF component automatically defaults to the Io0.0 IP address?
A. area ID
B. router ID
C. process ID
D. backbone ID
Answer: B
Q: 28
Which routes are automatically advertised to RIP neighbors on a Juniper router?
A. none
B. the loopback interface
C. all directly connected interfaces
D. interface addresses with RIP neighbors configured
Answer: A
Q: 29
What are two components essential to link-state routing protocols? (Choose two.)
A. SPF algorithm
B. poison reverse
C. reliable boding
D. distributed computation
Answer: A, C
Q: 30
Which two statements about login classes correctly define their usage within the JUNOS software? (Choose two.)
A. A different login class must be configured for each user.
B. Individual commands can be explicitly allowed or denied.
C. A user must be assigned to one of the default login classes.
D. Each login class is associated with one or more permissions flags.
Answer: B, D |
